24V 15ah Electric Bicycle Li-ion Battery Rechargeable E Bike Battery Pack

Items

Test Method and Condition

Criteria

Thermal exposure test

Each fully charged cell, stabilized at room temperature, is placed in a circulating air-convection oven. The oven temperature is raised at a rate of 5 °C/min ± 2 °C/min to a temperature of 130 °C ± 2 °C. The cell remains at this temperature for 10 min before the test is discontinued.

No fire, No explosion

Low pressure

Each fully charged cell is placed in a vacuum chamber, in an ambient temperature of 20~25℃. Once the chamber has been sealed, its internal pressure is gradually reduced to a pressure equal to or less than 11.6 kPa (this simulates an altitude of 15240 m) held at that value for 6 h.

No leakage, No fire, No explosion

Short test

The fully charged battery is to be short-circuited by connecting the positive and negative terminals of the battery with resistance load not exceed 100mΩ. Tests are to be conducted at room temperature 20~25℃.

No fire, No explosion

The Temperature of the Battery surface not exceeded than 150℃

Over Discharge

(After standard charge. Cells are discharged at constant Current of 0.2C to 2.0V, and the positive and negative terminal is connected by a 30Ω wire for 24 hours. Cell Condition: Fresh, Fully charged cell.)

No fire, No explosion

Over charge test

After standard charge, continue to charge with a constant voltage 4.8V per a cell, holding 8h.

No leakage, No fire, No explosion

Soak Test

Put the batteries into clean water, be soaked for 24 hours.

No break, No fire